Airbus A320 Family Development

Everything in connection with developing aircraft for FlightGear
Octal450
Posts: 2192
Joined: Sun Oct 18, 2015 2:47 am

Re: Airbus A320 Family Development

Postby Octal450 » Fri Apr 07, 2017 8:12 pm

New ADIRS system installed by legoboyvdlp, I made some minor fixes, now it should be working!

Octal450
Posts: 2192
Joined: Sun Oct 18, 2015 2:47 am

Re: Airbus A320 Family Development

Postby Octal450 » Sun Apr 16, 2017 5:21 am

Okay along with some fixes to ECAM REV indicators, and EXT PWR behavior, I made the reverser keys W and Q for now. Let me know what you think of this.

J

Octal450
Posts: 2192
Joined: Sun Oct 18, 2015 2:47 am

Re: Airbus A320 Family Development

Postby Octal450 » Mon Apr 17, 2017 4:12 am

New JSBsim based FBW system!!!!!!

Up on GIT

Thanks @richard for more JSB help!

Now the FBW will work properly on ANY system! Regardless of frames! (I hope, will test on my crappy laptop later)

Please feedback!!!

Octal450
Posts: 2192
Joined: Sun Oct 18, 2015 2:47 am

Re: Airbus A320 Family Development

Postby Octal450 » Tue Apr 25, 2017 7:17 pm

New Pneumatic System by legoboyvdlp modified by me.

Also thrust limits now to change to MCT and CLB properly.

Also cleaned up and optimized code.

Kind Regards,
Josh

User avatar
IAHM-COL
Posts: 6409
Joined: Sat Sep 12, 2015 3:43 pm
Location: Homey, NV (KXTA) - U.S.A
Contact:

Re: Airbus A320 Family Development

Postby IAHM-COL » Tue Apr 25, 2017 7:39 pm

this is becoming my favorite fgaircraft.
https://raw.githubusercontent.com/IAHM-COL/gpg-pubkey/master/pubkey.asc

R.M.S.
If we gave everybody in the World free software today, but we failed to teach them about the four freedoms, five years from now, would they still have it?

Octal450
Posts: 2192
Joined: Sun Oct 18, 2015 2:47 am

Re: Airbus A320 Family Development

Postby Octal450 » Wed Apr 26, 2017 12:50 am

THANK YOU ISRAEL :)

Kind Regards,
Josh

PS: How has the FBW been working?

Octal450
Posts: 2192
Joined: Sun Oct 18, 2015 2:47 am

Re: Airbus A320 Family Development

Postby Octal450 » Fri Apr 28, 2017 10:28 pm

The Pneumatic System has been overhauled.

Now the engine start system is realistic from a pneumatic point of view, they only start if there is enough pressure.

Bleeds work, etc.

Packs will be done very soon.

Kind Regards,
Josh

Octal450
Posts: 2192
Joined: Sun Oct 18, 2015 2:47 am

Re: Airbus A320 Family Development

Postby Octal450 » Wed May 03, 2017 2:19 am

Packs are done!

OK, I connected Aileron and Elevator to Hydraulics, with complicated stuff!

Next steps:
Get Rudder-FDM prop in FDE
Get Gear to only retract/extend if hydraulics powered
Get Spoilers to work with Aileron as spoileron
Get Spoiler to only work if hydraulics powered
Get Ailerons to go Upper when Ground Spoiler activated (like real A320)
Get Flaps/Slats to only work if hydraulics powered

Kind Regards,
Josh

Octal450
Posts: 2192
Joined: Sun Oct 18, 2015 2:47 am

Re: Airbus A320 Family Development

Postby Octal450 » Wed May 03, 2017 6:14 pm

OK GUYS!
I have connected the ailerons, spoilers, together, in a realistic way, and made them behave like real. Also drooping ailerons on ground.

I also smoothed the transitions.

Also made FBW Roll less sluggish.

Kind Regards,
Josh

Octal450
Posts: 2192
Joined: Sun Oct 18, 2015 2:47 am

Re: Airbus A320 Family Development

Postby Octal450 » Wed May 03, 2017 6:29 pm

OK I think I should give a status update for where we stand, and what my plans are.

By V1.0 this will be my goal:
Fully working everything as in real life, normal conditions.
Very few failures will be made.
Mostly working MCDU/FMGC simulation, with most normal functions.
IAE&CFM engines
P&W Engines for A318
EIS1 and EIS2 Displays/Logic
A318, A319-100/A319ACJ, A320-100, A320-200, A321-200
Some 2D Panels
Virtual Cockpit Fully functional
More Loadable Panel States
Sharklets/Regular Winglets (Except A320-100)
Full FlyByWire simulation
Load Manager


Then by update V1.1:
More Failures Simulation
A319neo, A320neo, A321neo
More MCDU/FMGC simulation.
Fix bugs (as always)

Then by update V1.2:
More Failures Simulation
More MCDU/FMGC simulation.
Fix bugs (as always)

Hopefully V1.2 will be the stable final version, Full Final Release of V1.0 is expected in early 2018 (but hey, sh*t happens)

This will be a study-level simulation.

From there we will move on to the next aircraft, while still providing bugfixes/support/etc, and maybe even more features.

This list is subject to change without notice. I am not required to advise when the list changes.

Thoughts? Ideas? Comments? Concerns? Something else? Let me know!

Kind Regards,
Josh


Return to “Aircraft Development”

Who is online

Users browsing this forum: No registered users and 10 guests